Machine foot - adjustable foot JCMHD 80C-S6-HSD145 with anti-slip-plate

Adjustable levelling foot, adjustable foot with hollow screw JCMHD80C-S6-HSD145 - Schwaderer levelling mounts

Levelling foot / adjustable foot JCMHD80C-S6-HSD145 sketch

Variations

	Machine foot - adjustable foot JCMHD 80C-S12-HSD145 with damping
	Machine foot - levelling foot JCMHD 80C-ST-HSD145

Material
Characteristics

Foot plate: casting plate, chrome-plated
Hollow screw: Steel 37-2 galvanized
Anti-Slip-Plate: Elastomer 85° Shore A, thickness 6 mm

The casting plate is better corrosion-resistant than steel. The corrosion resistance of JCMHD 80C-S6-HSD145 is further increased by chromium plating. It is a material with good thermal conductivity, good damping properties and has a good stiffness due to its brittleness.

The synthetic special rubber of the anti-slip-plate is suitable for high demands on the swelling resistance against fuel, oil, grease and alphatic solvents at higher temperatures.

The galvanizing of the hollow screw also offers a high corrosion protection.

Our solid machine feet or adjustable feet with chrome-plated cast plate find their application with high dynamic stresses.

The machine foot JCMHD 80C-S6-HSD145 with high accuracy is maintenance-free, infinitely variable over the fine thread and can be tilted to a certain degree, which simplifies precise assembly and alignment.

The inclination angle of approx. 7.5° in each direction, which can be adjusted via the ball-bearing hollow screw, guarantees a stable and accurate alignment of the machine.

Anti-skidding by anti-slip plate
Large adjustment range
Exact, infinitely variable levelling over fine threads
Compensation for ground irregularities without the need for expensive concrete foundations
For free-standing or screw-on machine mounting
Cost-effective installation method

The delivery of the machine feet JCMHD 80C-S6 is completely assembled.

Technical Details

Ø D	85 mm
D1	18,5 mm
H1	20 mm
H2	44 mm
H3	49 mm
H	135 mm
L	70 mm
	24 mm
	1,500 kg

Notice: The max. static load value refers to the foot plate. If you have any questions about the load on the foot plates or spindles, please feel free to contact our technical support.

Download data sheet (PDF)