Machine foot - adjustable foot JCMHD 130C-S12-HSD70 with damping

Adjustable levelling foot with hollow screw JCMHD 130C-S12-HSD70 - Schwaderer levelling mounts

Levelling foot / adjustable foot JCMHD 130C-S12-HSD70 sketch

Variations

	Machine foot - adjustable foot JCMHD 130C-S6-HSD70 with anti-slip-plate
	Machine foot - levelling foot JCMHD 130C-ST-HSD70

Material
Characteristics

Foot plate: casting plate, chrome-plated
Hollow screw: Steel 37-2 galvanized
Damping plate: Elastomer 85° shore A, thickness 12 mm

The casting plate is better corrosion-resistant than steel. The corrosion resistance is further increased by chromium plating. It is a material with good thermal conductivity, good damping properties and has a good stiffness due to its brittleness.

The galvanizing of the hollow screw also offers a high corrosion protection.

The synthetic special rubber of the damping plate is suitable for high demands on the swelling resistance against fuel, oil, grease and alphatic solvents at higher temperatures.

Our solid machine feet or adjustable feet with chrome-plated cast plate find their application with high dynamic stresses.

The machine foot JCMHD 130C-S12-HSD70 with high accuracy is maintenance-free, infinitely variable over the fine thread and can be tilted to a certain degree, which simplifies precise assembly and alignment.

The inclination angle of approx. 7.5° in each direction, which can be adjusted via the ball-bearing hollow screw, guarantees a stable and accurate alignment of the machine.

with vibration damping
Large adjustment range
Exact, infinitely variable levelling over fine threads
Compensation for ground irregularities without the need for expensive concrete foundations
For freestanding or screw-on machine mounting
Cost-effective installation method

The delivery of the machine feet is completely assembled.

Technical Details

Ø	140 mm
D1	18,5 mm
H1	29 mm
H2	54 mm
H3	59 mm
H	145 mm
L	70 mm
	24 mm
	1,500 kg

Notice: The max. static load value refers to the foot plate. If you have any questions about the load on the foot plates or spindles, please feel free to contact our technical support.

Download data sheet (PDF)