Machine mount - levelling foot SFE 80 vibration-damped
- Foot plate: stainless steel 1.4301 - AISI 304
- Threaded spindle: stainless steel 1.4301 - AISI 304
- Damping plate: vulcanized Elastomer, 70° Shore A, black (on request alternatively 50°/85° Shore A)
The stainless steel is resistant to oxidation, water, water vapor, humidity, food acids as well as weak organic and inorganic acids and is therefore easy to clean.
The synthetic special rubber of the vulcanized damping plate is suitable for high demands on the swelling resistance against fuel, oil, grease and alphatic solvents.
This machine lever or adjustable foot is also available in chrome plated steel. Further Shore hardnesses on request.
Machine mounts made of stainless steel are used particularly in areas where hygiene plays an important role. Moreover, its high-quality optics is highly appreciated.
Our high-quality, precision-machined machine mounts offer the advantage of reducing vibrations and reducing the noise caused by vibrations due to the vulcanized damping plate. In addition, the machines are protected, thus increasing their longevity.
The maintenance-free machine mount SFE80 with 80mm diameter is steplessly adjustable over the thread (depending on the spindle length) and tiltable to a certain degree, which simplifies precise assembly and alignment.
The adjustable angle of inclination of approx. 7.5 ° in each direction guarantees a stable and precise alignment of the machine.
The delivery of the machine mounts or levelling feet is completely assembled.
Our high-quality, precision-machined machine mounts offer the advantage of reducing vibrations and reducing the noise caused by vibrations due to the vulcanized damping plate. In addition, the machines are protected, thus increasing their longevity.
The maintenance-free machine mount SFE80 with 80mm diameter is steplessly adjustable over the thread (depending on the spindle length) and tiltable to a certain degree, which simplifies precise assembly and alignment.
The adjustable angle of inclination of approx. 7.5 ° in each direction guarantees a stable and precise alignment of the machine.
- Vibration damping with maximum stability
- Noise reduction and protection against slipping due to vulcanized damping plate
- Increase the longevity of machines, measuring instruments and products
- Compensation for ground irregularities without the need for expensive concrete foundations
- Large hex key surfaces for easy height adjustment
- Screwed connection between plate and spindle
The delivery of the machine mounts or levelling feet is completely assembled.
Sizes in stock and quickly available (please ask for special sizes) Machine mount SFE80:
- SFE80M8x50
- SFE80M8x80
- SFE80M8x100
- SFE80M8x120
- SFE80M8x150
- SFE80M8x180
- SFE80M8x200
- SFE80M8x250
- SFE80M8x300
- SFE80M10x50
- SFE80M10x80
- SFE80M10x100
- SFE80M10x120
- SFE80M10x150
- SFE80M10x180
- SFE80M10x200
- SFE80M10x250
- SFE80M10x300
- SFE80M12x50
- SFE80M12x80
- SFE80M12x100
- SFE80M12x120
- SFE80M12x150
- SFE80M12x180
- SFE80M12x200
- SFE80M12x250
- SFE80M12x300
- SFE80M14x50
- SFE80M14x80
- SFE80M14x100
- SFE80M14x120
- SFE80M14x150
- SFE80M14x180
- SFE80M14x200
- SFE80M14x250
- SFE80M14x300
- SFE80M16x50
- SFE80M16x80
- SFE80M16x100
- SFE80M16x120
- SFE80M16x150
- SFE80M16x180
- SFE80M16x200
- SFE80M16x250
- SFE80M16x300
- SFE80M20x50
- SFE80M20x80
- SFE80M20x100
- SFE80M20x120
- SFE80M20x150
- SFE80M20x180
- SFE80M20x200
- SFE80M20x250
- SFE80M20x300
- SFE80M24x50
- SFE80M24x80
- SFE80M24x100
- SFE80M24x120
- SFE80M24x150
- SFE80M24x180
- SFE80M24x200
- SFE80M24x250
- SFE80M24x300
- SFE80M30x50
- SFE80M30x80
- SFE80M30x100
- SFE80M30x120
- SFE80M30x150
- SFE80M30x180
- SFE80M30x200
- SFE80M30x250
- SFE80M30x300
Technical Details
| Ø D | 80 mm |
| H1 | 17 mm |
| H2 | 37 mm |
| H | 87 mm |
|
17 mm |
|
850 kg |
Notice: The max. static load value refers to the foot plate. If you have any questions about the load on the foot plates or spindles, please feel free to contact our technical support.
CAD DATA DOWNLOAD
Please enter your e-mail address for the download of the CAD-file.
Applications
- Food industry
- Botteling machinery
- Pharma- and cosmetics industry
- Chemical industry
- Packaging industry
- Sanitary facilities
- Textile industry
- Paper industry
300 kg
Ø
50 mm
850 kg
Ø
80 mm
3000 kg
Ø
125 mm
