Machine foot - adjustable foot JCMHD 130C-S6-HSD180 with anti-slip-plate

Levelling foot, adjustable foot with hollow screw JCMHD 130C-S6-HSD180, anti-slip plate

Levelling foot / adjustable foot JCMHD 130C-S6-HSD180 sketch

Variations

	Machine foot - levelling foot JCMHD 130C-S12-HSD180 with damping
	Machine foot - levelling foot JCMHD 130C-ST-HSD180

Material
Characteristics

Foot plate: casting plate, chrome-plated
Hollow screw: Steel 37-2 galvanized
Anti-Slip-Plate: Elastomer 85° Shore A, thickness 6 mm

The casting plate is better corrosion-resistant than steel. The corrosion resistance is further increased by chromium plating. It is a material with good thermal conductivity, good damping properties and has a good stiffness due to its brittleness.

The synthetic special rubber of the anti-slip-plate is suitable for high demands on the swelling resistance against fuel, oil, grease and alphatic solvents at higher temperatures.

The galvanizing of the hollow screw also offers a high corrosion protection with a temperature stability up to approx. 80 ° C.

Our solid machine feet or adjustable feet with chrome-plated cast plate find their application with high dynamic stresses.

The maintenance-free machine foot with high accuracy is infinitely variable over the fine thread and can be tilted to a certain degree, which simplifies precise assembly and alignment.

The inclination angle of approx. 7.5° in each direction, which can be adjusted via the ball-bearing hollow screw, guarantees a stable and accurate alignment of the machine.

Anti-skidding by anti-slip plate
Large adjustment range
Exact, infinitely variable levelling over fine threads
Compensation for ground irregularities without the need for expensive concrete foundations
For free-standing or screw-on machine mounting
Cost-effective installation method

The delivery of the machine feet is completely assembled.

Technical Details

Ø D	140 mm
D1	17 mm
H1	23 mm
H2	48 mm
H3	53 mm
H	209 mm
L	140 mm
	24 mm
	4,000 kg

Notice: The max. static load value refers to the foot plate. If you have any questions about the load on the foot plates or spindles, please feel free to contact our technical support.

Download data sheet (PDF)